Where do you find the fuel pump reset on a Mazda MPV 2000?

The Mazda MPV 2000 does not have a fuel pump reset button easily accessible from the passenger area like some other vehicles. However, there are a few ways you can reset the fuel pump if it is not working.

Option 1: Disconnect and reconnect the battery

1. Locate the battery and disconnect the positive terminal

2. Leave the terminal disconnected for 15 minutes

3. Reconnect the terminal

4. Turn on the ignition and see if the fuel pump is working

5. If the pump is still not working, try option 2

Option 2: Check the fuel pump relay

1. The fuel pump relay can sometimes be the cause of a non-working fuel pump

2. Locate the relay box and find the fuel pump relay. It should be labeled in the owner’s manual.

3. Remove the relay and check the connections. If the connections are loose or corroded, clean them and re-install the relay.

4. Turn the ignition on and check if the fuel pump is working.

If neither option 1 nor 2 works, it is possible that the fuel pump itself has failed. In this case, you will need to replace the pump.