* A T25 Torx screwdriver
* A flathead screwdriver
* A new low beam bulb socket
1. Park the car in a safe location and turn off the engine.
2. Open the hood of the car.
3. Locate the low beam bulb socket. It is located on the back of the headlight assembly, near the bottom.
4. Use the T25 Torx screwdriver to remove the two screws that hold the low beam bulb socket in place.
5. Use the flathead screwdriver to pry the low beam bulb socket out of the headlight assembly.
6. Remove the old low beam bulb socket from the headlight assembly.
7. Install the new low beam bulb socket into the headlight assembly.
8. Use the T25 Torx screwdriver to reinstall the two screws that hold the low beam bulb socket in place.
9. Close the hood of the car.
Your low beam bulb socket is now replaced.
