**Parts and Tools:*
- Diesel fuel pump
- Gaskets
- Fuel lines
- Wrench set
- Screwdriver
- Pliers
- Safety goggles
- Gloves
Instructions:
1. Park your Fiat Scudo on level ground and turn off the engine. Apply the parking brake.
2. Lift the hood and remove the engine cover.
3. Locate the fuel pump. It is usually mounted on the side or rear of the engine.
4. Disconnect the fuel lines from the diesel fuel pump.
5. Remove the bolts or screws that secure the pump to the engine.
6. Remove the old pump and gasket.
7. Install the new pump, gasket and install the bolts or screws.
8. Reconnect the fuel lines to the pump.
9. Crank the engine and check for leaks. If you see any, tighten the fuel line connections.
10. Replace the engine cover and close the hood.
Tips:
- Before you start the engine, make sure all of the fuel lines are properly connected and there are no leaks.
- Be careful not to drop any bolts or screws into the engine.
- If you have any doubts about your ability to perform this repair, consult with a certified mechanic.
