2. Open the hood of the vehicle.
3. Locate the headlight assembly that you need to replace.
4. Disconnect the electrical connector from the back of the headlight assembly.
5. Remove the three bolts that hold the headlight assembly in place.
6. Replace the headlight assembly with a new one.
7. Reinstall the three bolts that hold the headlight assembly in place.
8. Reconnect the electrical connector to the back of the headlight assembly.
9. Turn on the vehicle's headlights to make sure that they are working properly.
Here are some additional tips that may be helpful:
* You may need to use a screwdriver or a pry bar to release the electrical connector from the back of the headlight assembly.
* Be careful not to drop the headlight assembly when you are removing it.
* When you are installing a new headlight assembly, make sure that the rubber gasket is seated properly.
* If you have any questions about replacing the headlight assembly, you can consult a repair manual or contact a qualified mechanic.
