1. Park the vehicle on a level surface.
2. Run the engine for a few minutes to warm it up.
3. Turn off the engine and allow it to cool for a few minutes.
4. Locate the oil fill plug on the left-hand side of the crankcase, just above the oil drain plug.
5. Remove the oil fill plug using a 17mm wrench.
6. Add the correct amount of oil to the engine, as specified in the owner's manual.
7. Replace the oil fill plug and tighten it securely.
Option 2
1. Park the vehicle on a level surface.
2. Turn off the engine and allow it to cool for a few minutes.
3. Locate the oil dipstick on the left-hand side of the crankcase, near the front of the engine.
4. Pull out the oil dipstick and wipe it clean with a paper towel.
5. Reinsert the oil dipstick into the engine and pull it out again.
6. Check the oil level on the dipstick. The oil level should be between the "Full" and "Add" marks on the dipstick.
7. If the oil level is low, add the correct amount of oil to the engine, as specified in the owner's manual.
