Auto >> AutoSPT >  >> Engine

How do you Tighten chain on a 1985 suzuki 250 quad runner?

To tighten the chain on a 1985 Suzuki 250 QuadRunner, follow these steps:

1. Park the QuadRunner on a level surface and turn off the engine.

2. Locate the chain adjuster bolts on the rear axle carrier. There are two bolts, one on each side of the carrier.

3. Loosen the locknuts on the chain adjuster bolts.

4. Turn the chain adjuster bolts clockwise to tighten the chain.

5. Tighten the chain until it has about 1/2 inch of play up and down.

6. Retighten the locknuts on the chain adjuster bolts.

7. Start the QuadRunner and check the chain tension. The chain should not be too tight or too loose. If it is too tight, it will put unnecessary strain on the engine and transmission. If it is too loose, it could come off the sprockets and cause damage to the QuadRunner.

Here are some additional tips for tightening the chain on a 1985 Suzuki 250 QuadRunner:

- Make sure that the chain is properly lubricated before you tighten it.

- Do not over-tighten the chain. This could damage the chain and the sprockets.

- Check the chain tension regularly and adjust it as needed.