- Phillips head screwdriver
- Flat head screwdriver
- Socket set
- Ratchet
Instructions:
1. Disconnect the negative battery terminal.
2. Remove the four Phillips head screws that hold the instrument cluster in place.
3. Use the flat head screwdriver to pry up the trim pieces around the instrument cluster.
4. Remove the four nuts that hold the instrument cluster to the dashboard.
5. Carefully pull the instrument cluster out of the dashboard.
6. Disconnect the electrical connectors at the back of the instrument cluster.
To reinstall the instrument cluster, simply follow these instructions in reverse order. Be sure to reconnect the electrical connectors and tighten the screws and nuts securely.