Auto >> AutoSPT >  >> Engine

How do you put the drivers side window of 1996 BMS 318i back on track?

1. Prepare the window channel. Clean the window channel and the tracks with a mild detergent and water. Dry them with a clean cloth.

2. Apply a lubricant. Apply a silicone-based lubricant to the tracks and channels. Do not get the grease on the glass.

3. Position the window. Place the window in the frame. Make sure that it is evenly positioned and that it does not tilt to either side.

4. Secure the window. Tighten the bolts that secure the window to the frame.

5. Adjust the window. Roll the window up and down to check for clearance and proper alignment. Adjust as necessary.

6. Test the window. Open and close the window several times to make sure that it is operating smoothly and properly aligned.

Auto Repair
How do you change the transmission fluid on a 1998 Subaru Outback? What is the best brand of windshield cleaner?
Car Care
How Can I Make My Vehicle More Green? How To Seafoam Your Car? All You Need to Know What Causes The Failure Of 4WD Transfer Case Position Sensor Selector Switch?
Engine
How many miles per gallon do you get with a 2007 Ford Mustang? How hot does an engine block get?
Electric Car
Where is the AC fan on a Chevy Tracker How do you replace it? Chargemaster charge point offer for AA venues How much oil pressure does a 1999 Chevrolet 5.3 silverado have?
Autopilot
What is the minimum speed in left hand lane of interstate? Where is knock sensor of Nissan quest 1998?
Car Photos
Front of car shakes when braking? On which models of car do Ford offer rebates? How do you get a title if the car company went out of business?