- A Phillips head screwdriver
- A flat head screwdriver
- A 10mm socket wrench
- A T20 Torx screwdriver
Step 1: Remove the screws holding the bumper in place.
There are a total of 10 screws holding the bumper in place. Four screws are located along the top of the bumper, three are located along the bottom of the bumper, and three are located in the wheel wells.
Step 2: Pry off the clips holding the bumper in place.
Once you have removed the screws, you will need to pry off the clips holding the bumper in place. These clips are located along the top and bottom of the bumper, as well as in the wheel wells.
Step 3: Remove the bumper from the car.
Once you have pryed off all of the clips, you will be able to remove the bumper from the car. To do this, simply pull the bumper straight off of the car.
Step 4: Change the headlight bulb.
With the bumper removed, you can now access the headlight bulb. To change the headlight bulb, simply remove the old bulb by twisting it counterclockwise, and then insert the new bulb by twisting it clockwise.
Step 5: Reinstall the bumper.
Once you have changed the headlight bulb, you can reinstall the bumper by following the steps in reverse order.
