What if your Jacobson snow burst keeps stalling as soon you hit a patch of to blow and it is not blowing properlyany suggestionsI bought used the motor strong?

Check the auger chute for obstructions. A common cause of snow blowers stalling is an obstructed auger chute. This can be caused by snow, ice, or debris that has built up in the chute and is preventing the snow from being discharged properly. To check for an obstruction, turn off the snow blower and disconnect the spark plug wire. Then, use a shovel or other tool to clear any debris from the chute.

Check the drive belt. The drive belt is responsible for transferring power from the engine to the auger and impeller. If the drive belt is loose, worn, or damaged, it can cause the snow blower to stall. To check the drive belt, turn off the snow blower and disconnect the spark plug wire. Then, remove the cover from the drive belt housing and inspect the belt. If the belt is loose, adjust the tension according to the manufacturer's instructions. If the belt is worn or damaged, replace it.

Check the spark plug. A worn or damaged spark plug can also cause the snow blower to stall. To check the spark plug, turn off the snow blower and disconnect the spark plug wire. Then, remove the spark plug and inspect it. If the spark plug is worn or damaged, replace it.

Check the fuel filter. A dirty or clogged fuel filter can restrict the flow of fuel to the engine, causing the snow blower to stall. To check the fuel filter, turn off the snow blower and disconnect the spark plug wire. Then, remove the fuel filter and inspect it. If the fuel filter is dirty or clogged, replace it.

Check the carburetor. A dirty or clogged carburetor can also cause the snow blower to stall. To check the carburetor, turn off the snow blower and disconnect the spark plug wire. Then, remove the carburetor and inspect it. If the carburetor is dirty or clogged, clean it according to the manufacturer's instructions.

If you have checked all of the above and the snow blower is still stalling, it is possible that the engine is not getting enough power. This could be due to a problem with the fuel system, the electrical system, or the ignition system. If you are not comfortable troubleshooting these systems, you may need to take the snow blower to a qualified repair technician.

If the motor is strong, it is possible that the snow blower is not getting enough power to the auger and impeller. This could be due to a problem with the drive belt or the gearbox. Check the drive belt for cracks, tears, or fraying. If the drive belt is damaged, replace it. Check the gearbox for leaks or damage. If the gearbox is damaged, it will need to be repaired or replaced.