1. Open the rear hatch.
2. Locate the two 10mm bolts that hold the taillight in place. The bolts are located on the inside of the hatch, one near the top of the taillight and one near the bottom.
3. Remove the bolts using a wrench or socket set.
4. Pull the taillight assembly straight out from the vehicle. Be careful not to drop the taillight.
5. Disconnect the electrical connector from the back of the taillight assembly.
6. Remove the old bulb by turning it counterclockwise.
7. Insert the new bulb by turning it clockwise until it is snug.
8. Reconnect the electrical connector to the back of the taillight assembly.
9. Push the taillight assembly back into place in the vehicle.
10. Reinstall the two 10mm bolts.
11. Close the rear hatch.
