1. Gather the necessary tools. You will need a Phillips head screwdriver, a flat head screwdriver, and a pair of pliers.
2. Open the door.
3. Locate the window crank. The window crank is located on the inside of the door, near the center.
4. Remove the screws that hold the window crank in place. There are usually two screws that hold the window crank in place. Use the Phillips head screwdriver to remove these screws.
5. Pull the window crank off of the door. Once the screws are removed, you should be able to pull the window crank off of the door.
6. Remove the retaining clip. There is a retaining clip that holds the window crank in place on the door. Use the flat head screwdriver to pry the retaining clip off of the door.
7. Remove the window crank. Once the retaining clip is removed, you should be able to remove the window crank from the door.
Here are some additional tips for removing the manual window crank on an International 7400:
* If the screws are rusty or difficult to remove, you may need to use a penetrating oil to loosen them.
* Be careful not to drop the window crank when you remove it.
* If you are reinstalling the window crank, make sure that you put the retaining clip back in place.
