Check the spark plugs:
1. Remove the spark plugs and check if they are worn out or damaged.
2. If they are worn out, replace them with new spark plugs.
3. Ensure the spark plug wires are properly connected and not damaged.
Check the ignition coil:
1. Remove the ignition coil and check if it is cracked or damaged.
2. If it is damaged, replace it with a new ignition coil.
Check the distributor cap and rotor (if applicable):
1. Remove the distributor cap and check if it is cracked or damaged.
2. If it is damaged, replace it with a new distributor cap.
3. Check the distributor rotor and ensure it is not worn out or damaged.
4. If it is worn out, replace it with a new distributor rotor.
Check the ignition module:
1. Locate the ignition module and check if it is damaged or has loose connections.
2. If it is damaged, replace it with a new ignition module.
Check the wiring:
1. Check the wiring related to the ignition system for any damage or loose connections.
2. Repair any damaged or loose wiring.
Check the battery:
1. Check the battery voltage to ensure it is at least 12 volts.
2. If the battery voltage is low, charge or replace the battery.
Check the starter:
1. Check the starter to ensure it is functioning properly.
2. If the starter is not functioning correctly, replace it with a new starter.
