The basic steps for siphoning gas from a 1989 Chrysler Daytona with a carburetor and a gas tank located under the rear of the car are as follows:
Tools and materials needed:
- A length of clear plastic tubing (at least 3 feet)
- A container to hold the gas (such as a gas can or a large bottle)
- A piece of wood or a rag to use as a plug
- Safety glasses and gloves (optional)
Procedure:
1. Park your car in a safe location: Turn off the engine and set the parking brake. Ensure you're in a well-ventilated area away from any ignition sources.
2. Locate the fuel tank: The gas tank on a 1989 Chrysler Daytona is typically located under the rear of the car.
3. Remove the gas cap: Unscrew and remove the gas cap from the fuel tank.
4. Insert the tubing into the gas tank: Take one end of the clear plastic tubing and insert it into the gas tank, making sure to direct the other end into the container.
5. Plug the lower end of the tubing: Use the wooden dowel or rag to temporarily plug the lower end of the tubing. This will prevent the gas from leaking out.
6. Siphon the gas: With the lower end of the tubing still plugged, gently suck on the upper end of the hose until gas begins to flow into the container. Be careful not to swallow any of the gasoline or inhale the fumes.
7. Unplug the lower end of the tubing: Once the gas starts flowing through the tube, remove the plug from the lower end. This will allow the gas to flow more easily.
8. Monitor the gas flow: Keep an eye on both ends of the tube and the container to make sure the gas is flowing smoothly and not overflowing.
9. Replace the gas cap: Once the desired amount of gas has been siphoned, remove the tubing and replace the gas cap securely.
10. Dispose of the gas safely: Transfer the siphoned gas to a proper gas container and dispose of it according to your local regulations. Never pour gasoline into a sewer or drain.
Note: It's essential to exercise extreme caution when siphoning gas, as it can be a hazardous procedure. If you're not comfortable performing this task, it's best to have it done by a professional.
