* 10mm socket
* 12mm socket
* 14mm socket
* 17mm socket
* 19mm socket
* 22mm socket
* Breaker bar
* Torque wrench
* Flat-head screwdriver
* Pry bar
* Timing belt tensioner tool
Parts:
* Timing belt
* Timing belt tensioner
* Water pump
* Thermostat
* Coolant
Instructions:
1. Disconnect the negative terminal of the battery.
2. Remove the serpentine belt.
3. Remove the upper timing belt cover.
4. Remove the lower timing belt cover.
5. Turn the crankshaft pulley clockwise until the timing marks on the crankshaft pulley and camshaft gears are aligned.
6. Loosen the timing belt tensioner bolt and remove the timing belt.
7. Inspect the timing belt tensioner for wear and replace it if necessary.
8. Install the new timing belt.
9. Tension the timing belt by turning the tensioner pulley bolt clockwise until the specified torque is reached.
10. Reinstall the lower timing belt cover.
11. Reinstall the upper timing belt cover.
12. Reinstall the serpentine belt.
13. Reconnect the negative terminal of the battery.
14. Fill the cooling system with coolant.
