Make sure the car is turned off and the keys removed.
Locate the ignition switch on the dashboard.
Insert the key into the ignition switch and turn it to the "ON" position.
Press the small button located on the side of the ignition switch while turning it to the "OFF" position.
Pull the ignition switch out of the dashboard.
Remove the two screws that hold the ignition lock cylinder in place.
Pull the ignition lock cylinder out of the housing.
Remember, this is the recommended procedure for removing the ignition lock cylinder in a 1962 Ford Falcon, but it's always best to refer to the vehicle's specific owner's manual or consult with a professional if you have any doubts or concerns.
