1. Remove the Turbo 400 Transmission:
- Disconnect the transmission from the engine.
- Detach the driveshaft and other necessary components from the transmission.
- Lower and remove the turbo 400 transmission.
2. Install the 350 Engine:
- Remove any components necessary for engine removal (e.g., radiator, fans).
- Remove the old 350 engine.
- Install the new 350 engine into the vehicle.
3. Reconnect the Driveshaft:
- Once the 350 engine is installed, reconnect the driveshaft to the transmission.
- Ensure proper alignment and secure it accordingly.
4. Install the Turbo 400 Transmission:
- Position the turbo 400 transmission in place.
- Reconnect the transmission to the engine.
- Attach any additional components previously removed.
5. Verify Alignment and Fit:
- Verify that the transmission and engine are properly aligned.
- Ensure all components fit correctly and there are no obstructions.
6. Reconnect Electrical and Fluid Connections:
- Reconnect electrical connectors, fluid lines, and vacuum lines related to the transmission and engine.
7. Reinstall Radiator and Fans:
- If necessary, reinstall radiator, fans, and any other components previously removed.
8. Test Drive and Adjustments:
- Perform a test drive to ensure the driveline is functioning properly and there are no unusual vibrations or noises.
- Check for any leaks related to the transmission or engine.
Please note that this is a brief overview, and specific steps may vary depending on the vehicle model and year. Additionally, it's recommended to consult with a professional mechanic or refer to the vehicle's specific repair manual for accurate instructions.
