1. Dremel Tool:
- Use a Dremel tool equipped with a cutting disc to carefully cut through the metal fuel line.
- Ensure you wear safety glasses and take precautions to avoid sparks near fuel sources.
2. Hacksaw:
- Use a hacksaw to cut through the metal fuel line.
- Be cautious not to apply too much pressure, as it may cause the line to kink or deform.
3. Metal Snips:
- If the fuel line is made of thin metal, you may be able to cut it using heavy-duty metal snips.
- Make gradual cuts and be careful not to crush or damage the line.
4. Compression Fitting:
- Instead of cutting the fuel line, you can use a compression fitting to connect the new fuel pump.
- This involves slipping a compression sleeve over the end of the fuel line and tightening a nut or collar to create a seal.
5. Visit a Mechanic:
- If you're uncomfortable attempting any of these methods or don't have the necessary tools, it's best to take your vehicle to a qualified mechanic for assistance.
Remember to follow all safety precautions when working near fuel lines and ensure that the vehicle is in a well-ventilated area. Also, refer to your vehicle's specific repair manual for additional instructions and safety guidelines related to fuel system maintenance.
