* Floor jack
* Jack stands
* 1/2" socket set
* 3/8" socket set
* ratchet
* Extensions
* Torque wrench
Instructions
1. Raise the truck on the floor jack.
>
2. Place the jack stands underneath the truck. Lower the truck until it is secure on the jack stands.
>
3. Remove the bolts holding the transmission mount in place.
>
4. Remove the starter.
>
5. Disconnect the electrical connections from the transmission.
>
6. Disconnect the transmission lines.
>
7. Remove the bolts holding the transmission to the engine.
>
8. Use a pry bar to move the transmission away from the engine.
>
9. Lower the transmission down.
>
10. Remove the old transmission mount.
>
11. Install a new transmission mount.
>
12. Lift the transmission up and connect it to the engine.
>
13. Install the bolts that hold the transmission to the engine.
>
14. Connect the transmission lines.
>
15. Connect the electrical connections to the transmission.
>
16. Install the starter.
>
17. Install the bolts holding the transmission mount in place.
>
18. Lower the truck to the ground.
