Where is the IAC motor and how can it be cleaned?

The IAC (Idle Air Controller) motor is typically located on the throttle body of the engine. It can be difficult to reach and may require the removal of some other components in order to access it.

To clean the IAC motor, you will need:

1. A can of carburetor cleaner

2. A soft cloth

3. A small brush

1. Disconnect the battery. This is important to avoid any electrical shocks while working on the IAC motor.

2. Remove the air intake hose. This will give you access to the throttle body and the IAC motor.

3. Locate the IAC motor. It is usually mounted on the side of the throttle body and has a round or oval shape.

4. Spray carburetor cleaner into the IAC motor. Be sure to spray directly into the port where air flows through.

5. Use a soft cloth to wipe away any dirt or debris from around the IAC motor.

6. Use a small brush to gently clean the inside of the IAC motor port.

7. Reinstall the air intake hose and reconnect the battery.

8. Start the engine and allow it to idle for a few minutes. This will help to circulate the carburetor cleaner and clean out the IAC motor.

By following these steps, you can clean the IAC motor and help improve the performance of your vehicle.