2. Remove the distributor cap. This will give you access to the distributor rotor.
3. Find the timing mark on the crankshaft pulley. This is usually a small notch or line.
4. Align the timing mark on the crankshaft pulley with the pointer on the timing cover. This will ensure that the engine is at Top Dead Center (TDC).
5. Loosen the distributor hold-down bolt. This will allow you to rotate the distributor.
6. Rotate the distributor until the rotor points to the #1 spark plug wire terminal. This will ensure that the spark is delivered to the correct cylinder at the correct time.
7. Tighten the distributor hold-down bolt. This will secure the distributor in place.
8. Reconnect the battery. This will allow you to start the engine.
9. Check the timing with a timing light. This will ensure that the engine is running at the correct timing.
Here are some additional tips for resetting the timing on a 95 Saturn sl1 1.9 engine:
* Make sure that the engine is cold before you begin.
* Use a quality timing light.
* Follow the instructions in the service manual for your specific vehicle.
* If you are not comfortable performing this repair yourself, take it to a qualified mechanic.
