1. Locate the stripped bolt on the intake manifold cover.
2. Gather your tools, including an easy-out tool, drill, drill bit, and a wrench.
3. Drill a small pilot hole into the center of the stripped bolt using the drill and the appropriate drill bit.
4. Insert the easy-out tool into the pilot hole and tap it lightly with a hammer to secure it in place.
5. Attach the wrench to the easy-out tool and turn it counterclockwise to loosen and remove the stripped bolt.
6. Once the stripped bolt is removed, you can remove the intake manifold cover by unbolting the remaining bolts and lifting it off.
Please note that if the easy-out tool doesn't work or breaks inside the bolt, you may need to use an extraction tool or have a professional mechanic assist you in removing the stripped bolt.
