* Replacement engine mount
* Metric socket set
* Ratchet
* Extension
* Torque wrench
* Jack and jack stands
Instructions
1. Park the Acura Legend on a level surface and turn off the engine.
2. Allow the engine to cool down completely.
3. Raise the front of the vehicle using the jack and jack stands.
4. Remove the underbody cover to access the engine mount.
5. Disconnect the negative battery cable.
6. Remove the bolts that secure the engine mount to the engine and the subframe.
7. Remove the old engine mount from the vehicle.
8. Position the new engine mount in place.
9. Install the bolts that secure the engine mount to the engine and the subframe.
10. Tighten the bolts to the specified torque.
11. Connect the negative battery cable.
12. Lower the front of the vehicle using the jack and jack stands.
13. Remove the jack and jack stands.
Tips
* If the engine mount is difficult to remove, you can use a pry bar to pry it loose.
* Be careful not to damage any of the surrounding components when removing the engine mount.
* Make sure that the engine mount is properly installed before operating the vehicle.
This repair requires specific tools and knowledge and is not recommended for do-it-yourselfers. If you are not comfortable performing this repair, we recommend that you take your vehicle to a qualified mechanic.
