The PCV valve is located on the right (passenger side) side of the engine, just below the throttle body. It is a small, black, cylindrical valve with a hose connected to one end.
2015-2019 2.5L Engine
The PCV valve is located on the rear (firewall side) of the engine, just above the transmission. It is a small, black, cylindrical valve with a hose connected to one end.
2016-2019 3.6L Engine
The PCV valve is located on the front (radiator side) of the engine, just below the intake manifold. It is a small, black, cylindrical valve with a hose connected to one end.
Removal and Installation
1. Disconnect the hose from the PCV valve.
2. Use a 17 mm wrench to loosen the PCV valve.
3. Remove the PCV valve from the engine.
4. Inspect the PCV valve for damage or wear.
5. If the PCV valve is damaged or worn, replace it.
6. Install the new PCV valve in reverse order of removal.
7. Tighten the PCV valve to 18 ft-lb (25 Nm).
8. Reconnect the hose to the PCV valve.
