The fuse for your Acura Integra's speedometer is located in the fuse box that is located in the driver's side footwell. The fuse box is covered by a black plastic cover. To access the fuse box, you will need to remove the cover by pulling it straight up.
The speedometer fuse is labeled "SPDO." It is a 10-amp fuse. If the speedometer fuse is blown, you will need to replace it with a new 10-amp fuse.
Here are the steps on how to replace the speedometer fuse in your Acura Integra:
1. Turn off the engine and allow the car to cool down.
2. Open the driver's side door and remove the floor mat.
3. Locate the fuse box cover and remove it by pulling it straight up.
4. Find the speedometer fuse (labeled "SPDO") and pull it out of the fuse box.
5. Inspect the fuse to see if it is blown. A blown fuse will have a broken filament.
6. If the speedometer fuse is blown, replace it with a new 10-amp fuse.
7. Reinsert the fuse box cover and close the driver's side door.
8. Start the engine and verify that the speedometer is working properly.
