2. Locate the radio. The radio is located in the center of the dashboard. It is held in place by two screws on the top and two screws on the bottom.
3. Remove the screws holding the radio in place. Use a Phillips head screwdriver to remove the screws.
4. Pull the radio out of the dashboard. Once the screws are removed, you can pull the radio out of the dashboard. Be careful not to drop the radio.
5. Disconnect the wiring harness from the back of the radio. The wiring harness is connected to the radio by a series of clips. Use a flathead screwdriver to pry open the clips and disconnect the harness.
6. Remove the radio from the car. Once the wiring harness is disconnected, you can remove the radio from the car.
