* 3/8-inch socket set
* 1/4-inch drive ratchet
* Phillips and flat-blade screwdrivers
* Flashlight
* Replacement fuel injectors
* Fuel injector o-rings
* Rags
* Safety glasses
* Fuel line disconnect tool
Instructions:
1. Park the car in a well-ventilated area and turn off the engine.
2. Disconnect the negative battery terminal.
3. Remove the air filter cover.
4. Locate the fuel injectors. They are on the top of the intake manifold.
5. Disconnect the fuel lines from the fuel injectors by using the fuel line disconnect tool. Be careful not to spill any fuel.
6. Remove the bolts holding the fuel injector rail in place.
7. Lift the fuel injector rail and injectors out of the intake manifold.
8. Replace the o-rings on the fuel injectors.
9. Install the new fuel injectors into the intake manifold.
10. Replace the fuel injector rail and tighten the bolts.
11. Reconnect the fuel lines to the fuel injectors.
12. Replace the air filter cover.
13. Reconnect the negative battery terminal.
14. Start the engine and check for any leaks.
