1. Open the driver's side door and locate the fuse box. It is located under the dashboard, to the left of the steering wheel.
2. Remove the cover of the fuse box.
3. Locate the brake light fuse. It is labeled "STOP" or "BRAKE" on the fuse box cover.
4. Remove the old brake light fuse by gently pulling it out with your fingers or using a pair of tweezers.
5. Install the new brake light fuse by pushing it into the empty slot until it clicks into place.
6. Replace the cover of the fuse box.
7. Close the driver's side door.
Here are some additional tips for changing the brake light fuse in a 1997 Toyota Corolla:
- If you do not know which fuse is the brake light fuse, you can check the owner's manual for your vehicle.
- If you do not have a new brake light fuse, you can purchase one at an auto parts store.
- Be sure to replace the old fuse with a new fuse of the same amperage. Using a fuse with a higher amperage can damage your vehicle's electrical system.
- If you have any questions about changing the brake light fuse in your 1997 Toyota Corolla, you can contact a qualified mechanic for assistance.
