* Turbocharger (T25 or T04)
* Turbo manifold
* Downpipe
* Intercooler
* Intake manifold
* Fuel injectors
* Fuel pressure regulator
* Boost controller
* Blow-off valve
* Wastegate
*Turbo oil feed line and return line
* Coolant lines
* Vacuum hoses
* Various gaskets and hardware
Instructions
1. Remove the non-turbo engine from the car.
2. Install the turbo manifold and turbocharger.
3. Install the downpipe.
4. Install the intercooler.
5. Install the intake manifold.
6. Install the fuel injectors.
7. Install the fuel pressure regulator.
8. Install the boost controller.
9. Install the blow-off valve.
10. Install the wastegate.
11. Install the oil feed line and return line.
12. Install the coolant lines.
13. Install the vacuum hoses.
14. Install the gaskets and hardware.
15. Install the engine back in the car.
Tuning
Once the turbo is installed, the car will need to be tuned to run properly. This can be done by a qualified mechanic or tuner. The goal of tuning is to make sure that the engine is getting the correct amount of fuel and air, and that the boost pressure is set correctly.
Safety Precautions
Working with a turbocharger can be dangerous. It is important to take safety precautions when working on a turbo system. These precautions include:
* Wear eye protection and gloves.
* Do not touch the turbocharger while it is hot.
* Be careful of sharp edges.
* Use the proper tools for the job.
* Follow all instructions carefully.
