1. Gather Your Materials:
- Nissan PSF (power steering fluid) or equivalent
- Funnel
- Clean Rags
- Fluid disposal container
2. Prepare Your Vehicle:
- Park the vehicle on level ground and turn off the engine. Allow the engine to cool down.
- Engage the parking brake and chock the wheels for safety.
- Open the hood of your Nissan Altima GLX.
3. Locate the Power Steering Fluid Reservoir:
- The power steering fluid reservoir is typically located in the engine bay, near the firewall on the passenger side.
- It's a translucent plastic container with a black cap, labeled "Power Steering Fluid" or "PSF."
4. Check the Fluid Level:
- With a clean rag, wipe the dipstick clean and reinsert it into the reservoir.
- Pull it out and check the fluid level.
- It should be between the "MIN" and "MAX" marks on the dipstick.
5. Add Steering Fluid (if needed):
- If the fluid level is low, you need to add some steering fluid.
- Open the reservoir cap and carefully pour the steering fluid into the reservoir using the funnel.
- Avoid overfilling the reservoir.
- Reinstall the reservoir cap securely.
6. Check for Leaks:
- Visually inspect the power steering lines and connections for any leaks.
- Look for any drips or fluid residue on the ground under the car.
- If you see any leaks, have them repaired by a qualified mechanic as soon as possible.
7. Test the Steering:
- Start the engine and allow it to idle for a few minutes.
- Gently turn the steering wheel from left to right several times, checking for any unusual sounds or stiffness.
- If the steering feels smooth and responsive, you're good to go.
8. Clean Up & Dispose:
- Clean up any spilled fluid with a clean rag.
- Properly dispose of any leftover fluid in accordance with your local regulations.
Remember, consult your vehicle's owner's manual for specific instructions for your model and always use the recommended steering fluid type for your vehicle.
