- Fuel pump assembly (with fuel pump, fuel filter, and strainer)
- Fuel line disconnect tool
- Flat head screwdriver
- Phillips head screwdriver
- Wrenches (various sizes)
- Pliers
- Shop rags
- Safety glasses
Procedure:
1. Park your vehicle on a level surface and turn off the engine.
2. Relieve the fuel system pressure by removing the fuel pump fuse from the fuse box.
3. Locate the fuel pump assembly under the rear seat of your vehicle.
4. Use a flat head screwdriver to pry open the access cover.
5. Use a fuel line disconnect tool to disconnect the fuel lines from the fuel pump assembly.
6. Use a Phillips head screwdriver to remove the mounting screws that hold the fuel pump assembly in place.
7. Gently remove the fuel pump assembly from the fuel tank.
8. Inspect the old fuel pump assembly for any damage or wear.
9. Install the new fuel pump assembly into the fuel tank.
10. Secure the fuel pump assembly with the mounting screws.
11. Reconnect the fuel lines to the fuel pump assembly.
12. Replace the fuel pump fuse.
13. Start the engine and check for any leaks.
Note: If you are not comfortable performing this repair yourself, it is best to have it done by a qualified mechanic.
