*Tools and Materials Needed:*
- 10mm socket wrench
- Phillips head screwdriver
- Flat head screwdriver
- Pliers
Step-by-Step Guide:
1. Disconnect Battery:
Before starting, disconnect the negative terminal of the battery to prevent any electrical accidents.
2. Remove Steering Column Cover:
- Use the 10mm socket wrench to remove the two bolts that hold the steering column cover in place.
- Carefully remove the steering column cover by pulling it upwards.
3. Remove Instrument Cluster Bezel:
- Locate the screws holding the instrument cluster bezel in place. Use the Phillips head screwdriver to remove these screws.
- Gently pry off the instrument cluster bezel using the flat head screwdriver. Be careful not to damage the bezel.
4. Remove Instrument Cluster:
- Locate the screws holding the instrument cluster in place. Use the Phillips head screwdriver to remove these screws.
- Carefully pull the instrument cluster out from the dashboard. Disconnect any electrical connectors attached to the back of the cluster.
5. Remove Radio and HVAC Control Panel:
- Use the Phillips head screwdriver to remove the screws that hold the radio and HVAC control panel in place.
- Disconnect any electrical connectors attached to the back of these components.
- Carefully pull out the radio and HVAC control panel from the dashboard.
6. Remove Center Console:
- Remove the screws holding the center console in place.
- Disconnect electrical connectors and shift linkage if equipped.
- Carefully pry up the center console and remove it from the vehicle.
7. Remove Dashboard Bolts:
- Locate the bolts holding the dashboard in place. These bolts are usually found under the dashboard on both sides.
- Use the 10mm socket wrench to remove these bolts.
8. Remove Dashboard:
- Gently pull the dashboard towards you to disengage it from the clips that hold it in place.
- Lift up the dashboard and carefully remove it from the vehicle.
Note:
- Some Isuzu Rodeo models may have additional components mounted on the dashboard, such as speakers or vents. Disconnect any necessary electrical connectors before removing the dashboard.
- Be careful not to damage the dashboard, especially around the edges and corners, when removing it.
Always refer to your vehicle's service manual for specific instructions related to your particular Isuzu Rodeo model and trim level.
