The fuel filter is typically located in the fuel line between the fuel tank and the carburetor. It is a small, cylindrical-shaped object with a black or clear plastic housing.
Step 2: Remove the fuel filter
To remove the fuel filter, you will need to loosen the hose clamps that hold it in place. You can do this with a flat-head screwdriver or a pair of pliers.
Step 3: Clean the hose clamps and the fuel line
While the fuel filter is removed, take a moment to clean the hose clamps and the fuel line to which the filter is attached. This will help prevent any leaks from occurring.
Step 4: Install the new fuel filter
Insert the new fuel filter into the fuel line and tighten the hose clamps. Be sure to tighten the hose clamps securely so that the fuel filter does not leak.
Step 5: Start the lawn mower
Start the lawn mower and let it run for a few minutes. This will allow the new fuel filter to become saturated with fuel.
Step 6: Check for leaks
Check the fuel line and the fuel filter for any leaks. If you see any leaks, tighten the hose clamps until the leaks stop.
Step 7: You're done!
You have now successfully changed the fuel filter on your lawn mower.
