* Socket wrench set
* Screwdriver
* Pliers
* New alternator
* Replacement drive belt
Instructions
1. Disconnect the battery ground cable.
2. Remove the air cleaner housing.
3. Remove the serpentine belt.
4. Remove the alternator bracket bolt.
5. Remove the upper alternator bolt.
6. Remove the lower alternator bolt.
7. Remove the alternator from the vehicle.
8. Connect the new alternator to the vehicle.
9. Install the new drive belt.
10. Install the alternator bracket bolt.
11. Install the upper alternator bolt.
12. Install the lower alternator bolt.
13. Install the air cleaner housing.
14. Connect the battery ground cable.
15. Test the alternator by starting the engine and checking for proper voltage output.
Additional Notes
* The alternator is located on the front of the engine, near the top.
* The alternator is connected to the engine by a drive belt.
* The alternator is held in place by two bolts.
* The alternator is responsible for charging the battery and powering the electrical system of the vehicle.
