---
1. Locate the condenser: It is usually a small, cylindrical part located near the spark plug.
2. Disconnect the spark plug wire: Remove the spark plug wire from the spark plug.
3. Remove the mounting screws: Use a screwdriver to remove the screws that hold the condenser in place.
4. Remove the condenser: Once the screws are removed, you can remove the condenser from the engine.
5. Install the new condenser: Place the new condenser on the engine and secure it with the mounting screws.
6. Reconnect the spark plug wire: Reattach the spark plug wire to the spark plug.
7. Start the engine and test it: Once the new condenser is installed, start the engine and test it to make sure that it is running correctly.
---
Note: Before you begin working on the engine, make sure that the engine is turned off and cool and ensure you have the proper tools for the job.
Note: When working with small engines, always refer to the manufacturer’s instructions for specific information and guidance.
