* Wrench set
* Socket set
* Ratchet
* Extension bar
* Breaker bar
* Oxygen sensor socket
* pry bar
* Hacksaw
* Safety glasses
* Gloves
Instructions:
1. Park your car in a safe location and turn off the engine. Allow the engine to cool down completely.
2. Engage the parking brake.
3. If the exhaust system has a catalytic converter, check to see if it is still intact. If the catalytic converter is damaged, it must be replaced before continuing.
4. Locate the exhaust system clamps and loosen them with a wrench.
5. Use a pry bar to pry the exhaust system loose from the exhaust manifolds.
6. Remove the old exhaust system from the vehicle.
7. Install the new exhaust system in the reverse order of removal. Be sure to tighten all of the clamps securely.
8. Start the engine and check for leaks. If you hear any leaks, tighten the clamps further.
