- Replacement fuel pump
- Fuel line disconnect tool
- Flathead screwdriver
- Metric socket set
- Safety glasses
- Gloves
- Jack
- Jack stands
Instructions:
1. Park your vehicle on a level surface and turn off the engine.
2. Jack up your vehicle and secure it with jack stands.
3. Locate the fuel pump. The fuel pump is located on the driver's side of your vehicle, under the rear seat.
4. Disconnect the electrical connector from the fuel pump.
5. Remove the fuel lines from the fuel pump. Use a fuel line disconnect tool to disconnect the fuel lines. Be careful not to spill any fuel.
6. Remove the four bolts holding the fuel pump to the fuel tank.
7. Lower the fuel pump from the fuel tank.
8. Inspect the fuel pump for any damage.
9. If necessary, replace the fuel filter.
10. Install the new fuel pump by reversing the above steps.
11. Test the fuel pump by starting the engine and checking for leaks.
12. Lower your vehicle and remove the jack stands.
