You will need the following tools and materials:
* Jack
* Jack stands
* Oil drain pan
* Funnel
* New engine oil (or power steering fluid)
* Wrench
* Rags
Instructions:
1. Park your vehicle on a level surface and turn off the engine.
2. Engage the parking brake.
3. Jack up the front of your vehicle and support it on jack stands.
4. Locate the oil drain plug on the bottom of the oil pan.
5. Place the oil drain pan under the drain plug.
6. Loosen the drain plug with a wrench and allow all of the old engine oil (or power steering fluid) to drain out.
7. Replace the drain plug and tighten it securely.
8. Locate the oil fill cap on the top of the engine (or power steering fluid reservoir).
9. Remove the oil fill cap.
10. Use a funnel to add the correct amount of new engine oil (or power steering fluid) to your vehicle.
11. Replace the oil fill cap and tighten it securely.
12. Lower your vehicle from the jack stands.
13. Start the engine and let it run for a few minutes.
14. Check the oil level (or power steering fluid level) and add more if necessary.
_If you are not confident in your ability to perform this procedure, we recommend that you take your vehicle to a qualified mechanic._
