1. Prepare the mixer truck. Park the truck in a safe, level location. Turn off the engine and allow it to cool down. Disconnect the water supply and air lines from the mixer drum.
2. Wet the concrete. Spray the concrete with water using a garden hose or pressure washer. This will help to loosen the concrete and make it easier to remove.
3. Apply a concrete remover. Apply a concrete remover to the concrete. Follow the directions on the product label for best results.
4. Let the concrete remover sit. Allow the concrete remover to sit for the amount of time specified on the product label.
5. Scrub the concrete. Scrub the concrete with a stiff brush. This will help to loosen and remove any remaining concrete.
6. Rinse the mixer truck. Rinse the mixer truck with water using a garden hose or pressure washer.
7. Inspect the mixer truck. Inspect the mixer truck for any remaining concrete. If necessary, repeat steps 2-6.
Method 2: Using a Jackhammer
1. Prepare the mixer truck. Park the truck in a safe, level location. Turn off the engine and allow it to cool down. Disconnect the water supply and air lines from the mixer drum.
2. Set up the jackhammer. Set up the jackhammer according to the manufacturer's instructions.
3. Break up the concrete. Use the jackhammer to break up the concrete into small pieces.
4. Remove the concrete. Remove the concrete pieces from the mixer truck using a shovel or wheelbarrow.
5. Rinse the mixer truck. Rinse the mixer truck with water using a garden hose or pressure washer.
6. Inspect the mixer truck. Inspect the mixer truck for any remaining concrete. If necessary, repeat steps 2-5.
Tips
- Always wear gloves, eye protection, and a dust mask when working with concrete.
- Work in a well-ventilated area.
- Be careful when using a jackhammer. Jackhammers can be dangerous if they are not used properly.
- If you are unsure how to remove concrete from a mixer truck, consult with a professional.
