- 3/8-inch socket set
- 1/2-inch socket set
- Flat head screwdriver
- Pry bar
- Hammer
Instructions:
1. Disconnect the battery.
2. Remove the tilt lever from the steering column.
3. Remove the steering wheel.
4. Remove the upper bearing retainer and bearing.
5. Remove the lower bearing retainer and bearing.
6. Install the new lower bearing retainer and bearing.
7. Install the new upper bearing retainer and bearing.
8. Reinstall the steering wheel.
9. Reinstall the tilt lever.
10. Reconnect the battery.
Additional tips:
- Make sure to purchase the correct bearing sizes for your vehicle.
- If the bearings are difficult to remove, you can use a pry bar or hammer to help loosen them.
- Be careful not to damage the steering column when removing the bearings.
- If you are uncomfortable performing this repair, you can always take your vehicle to a qualified mechanic.
