- New coolant
- Distilled water
- 5-gallon bucket
- Funnel
- Screwdriver
- Pliers
- Rags
- Safety glasses
Instructions:
1. Park your car in a level area and let it cool down.
2. Remove the radiator cap.
3. Open the drain plug at the bottom of the radiator.
4. Allow all of the old coolant to drain into the bucket.
5. Close the drain plug.
6. Flush the radiator with distilled water.
7. Drain out all of the water.
8. Add the new coolant to the radiator.
9. Add distilled water until the radiator is full.
10. Replace the radiator cap.
11. Turn on the engine and let it idle for a few minutes.
12. Check the coolant level and add more if necessary.
13. Drive the car for a few minutes to circulate the coolant.
14. Check the coolant level again and add more if necessary.
Tips:
- Be sure to use the correct type of coolant for your car.
- Do not reuse old coolant.
- Mix the coolant with distilled water according to the manufacturer's instructions.
- Be careful not to spill any coolant on yourself or the paint of your car.
