1. Gather necessary materials:
- New transponder key
- Original key (if available)
- Spare key (if available)
- Toyota Landcruiser owner’s manual
- A compatible key programming device
2. Insert the original or spare key:
- Insert the original key or spare key into the ignition.
3. Turn the ignition ON and OFF:
- Turn the ignition to the “ON” position and then immediately back to the “OFF” position.
- Repeat this step two more times.
4. Remove the key:
- Remove the key from the ignition.
5. Insert the new transponder key:
- Insert the new transponder key into the ignition.
6. Turn the ignition ON and OFF:
- Turn the ignition to the “ON” position and then immediately back to the “OFF” position.
7. Repeat step 6:
- Repeat step 6 two more times.
8. Start the engine:
- Start the engine of your Toyota Landcruiser.
9. Check the key functionality:
- Test the new transponder key by locking and unlocking the doors, and starting the car.
10. Refer to the owner’s manual:
- Consult your vehicle's owner's manual for specific instructions on transponder key programming, as there may be variations based on the model and year.
Note:
* This procedure is a simplified version and the actual steps may differ depending on your Landcruiser model and year. Consult your owner’s manual or refer to a reputable automotive locksmith or Toyota dealership for more precise guidance.
* Some Toyota models may require additional programming steps or specialized equipment for transponder key programming.
