Auto >> AutoSPT >  >> Engine

How do you put oil in for the gearbox of a Vauxhall vectra?

To put oil in the gearbox of a Vauxhall Vectra, you will need the following tools and materials:

- New gearbox oil (check your owner's manual for the correct type and amount)

- A funnel

- A 10mm Allen key

- A jack

- Jack stands

- Safety glasses

Instructions:

1. Park your Vectra on a level surface and apply the parking brake.

2. Turn off the engine and allow it to cool down.

3. Jack up the front end of your Vectra and support it with jack stands.

4. Locate the gearbox oil filler plug. It is usually located on the top of the gearbox, near the front.

5. Remove the filler plug using a 10mm Allen key.

6. Insert the funnel into the filler hole.

7. Add new gearbox oil slowly, until it reaches the bottom of the filler hole.

8. Replace the filler plug and tighten it securely.

9. Lower the Vectra off the jack stands.

If you are still unsure how to put oil in the gearbox of your Vauxhall Vectra, it is always best to consult with a qualified mechanic.