* Bolt Pattern (PCD): This is the number of lug nuts and the diameter of the circle they form. Different vehicles have different bolt patterns. You MUST match the bolt pattern of the Explorer wheel to the bolt pattern of the other vehicle. This is the most critical factor.
* Wheel Diameter: This is the size of the wheel, usually expressed in inches (e.g., 17", 18", 20"). While slightly different diameter wheels *might* fit (with potential rubbing issues), it's best to stick to the same or very similar diameter.
* Wheel Width: Expressed in inches, this is how wide the wheel is. Again, a close match is ideal. Too wide a wheel could rub against the suspension or body, while too narrow might not be safe.
* Offset: This measures the distance between the wheel's mounting surface and its centerline. Incorrect offset can cause rubbing, affect handling, and potentially damage components.
* Center Bore: The hole in the center of the wheel that fits over the hub of the vehicle. The center bore of the Explorer wheel must be either the same size or slightly smaller than the hub of the other vehicle (a hub-centric ring can be used to make up the difference for a smaller bore).
To find compatible vehicles:
You need to determine the specific bolt pattern, diameter, width, offset, and center bore of your Ford Explorer wheels. Then, you can use this information to search for vehicles with the same specifications. Websites and resources specializing in wheels and tires are helpful for this. You can also consult a parts catalog or a tire shop professional.
In short: While there *might* be other Ford models or even some vehicles from other manufacturers that share the same wheel specifications, you must verify the exact specs before attempting to fit them. Using incorrect wheels is dangerous and can lead to accidents.
