1) Remove the convertible top.
2) Remove the rear window seal.
3) Remove the old rear window.
4) Install the new rear window.
5) Replace the rear window seal.
6) Reinstall the convertible top.
Here are some detailed steps:
1) To remove the convertible top, first open the trunk. Then, use a socket wrench to remove the bolts that hold the convertible top frame to the car. Once the bolts are removed, you can lift the convertible top off the car.
2) To remove the rear window seal, use a flat-blade screwdriver to pry the seal out of the channel. Be careful not to damage the paint or the convertible top.
3) To remove the old rear window, use a razor blade to cut through the adhesive that holds the window in place. Be careful not to cut yourself.
4) To install the new rear window, first remove the backing from the adhesive. Then, carefully position the window in the opening. Press the window firmly in place until the adhesive is secure.
5) To replace the rear window seal, first clean the channel where the seal is installed. Then, apply a bead of adhesive to the seal and press the seal into place.
6) To reinstall the convertible top, simply reverse the steps that you took to remove it. Be sure to tighten the bolts securely so that the convertible top is held in place securely.
If you are not comfortable performing this repair yourself, you can take your car to a qualified auto repair shop.
