Auto >> AutoSPT >  >> Car Photos

How do you change a mirror switch on an Audi TT?

To change the mirror switch in an Audi TT, you will need the following tools:

- A Torx T20 screwdriver

- A trim removal tool

- A new mirror switch

1. Firstly, insert the trim removal tool between the mirror switch surround and the door panel, and carefully pry the surround out.

2. Once the surround is removed, you will see two Torx T20 screws. Remove these screws to release the mirror switch.

3. Disconnect the electrical connector from the back of the mirror switch and remove it from the car.

4. To install the new mirror switch, simply reverse the removal procedure. Be sure to connect the electrical connector before installing the Torx screws.

5. Once the new mirror switch is installed, test it to make sure it is working properly.

Auto Repair
Premium Features to Look for in Used Luxury Cars - Bemer Motor Cars Tire Sidewall Cracking: What Causes Dry Rot in Tires and How to Prevent It
Car Care
How to Replace The Cabin Air Filter And Air Filter in Your Car Tire Dressing 101 – Learning the Facts About Tire Shine Products Where can Avis coupons for car rental be found?
Engine
A fix for water getting into headlight assembly 2000 Lincoln LS? What does 1.2 l engine size means?
Electric Car
How fast can a 1997 Pontiac trans am go from zero to sixty? How do you unhook the back seat of a 2007 Dodge Charger? What should the output voltage of a 1993 Subaru Imprezza oxygen sensor be?
Autopilot
How do you set the timing on Honda atc 1986 200x? Where can you find a rear rim for an APC Mini Harley?
Car Photos
What is the procedure to remove taillight lenses on a 2002 Jeep Liberty? Where can a person find specials on car rentals in the Chicago area? Where can you find a vacuum diagram for 1994 Dodge Ram Van?