1. Open the hood.
2. Locate the headlight assembly.
3. Remove the rubber cover from the back of the headlight assembly.
4. Unscrew the two screws that hold the headlight assembly in place.
5. Remove the headlight assembly from the vehicle.
6. Disconnect the electrical connector from the back of the headlight assembly.
7. Release the retaining clip that holds the light bulb in place.
8. Remove the light bulb from the headlight assembly.
9. Install a new light bulb.
10. Secure the retaining clip.
11. Reconnect the electrical connector.
12. Install the headlight assembly onto the vehicle.
13. Replace the screws that hold the headlight assembly in place.
14. Replace the rubber cover on the back of the headlight assembly.
To change the low beam bulbs, follow the same steps as above, except for the following:
- Step 3: Remove the plastic cover from the back of the headlight assembly.
- Step 4: Remove the two screws that hold the plastic cover in place.
