Auto >> AutoSPT >  >> Car Photos

02 Hyundai XG350 tighten rear view mirror?

Tools and materials needed:

* Phillips head screwdriver

* Flathead screwdriver

* T15 Torx bit

* Ratchet

* 10mm socket

* New rearview mirror

Instructions:

1. Start by turning off your car engine and opening the hood.

2. Locate the two screws on the back of the rearview mirror. These screws are typically located near the top and bottom of the mirror.

3. Remove the two screws using a Phillips head screwdriver.

4. Once the screws are removed lift up the base of the rearview mirror. It will snap off.

5. There are 4 T15 Torx screws holding the mirror to the windshield.

6. Remove these screws using a T15 Torx bit and ratchet.

7. Remove the mirror by gently pulling it away from the windshield. Be careful not to drop the mirror.

8. To install the new rearview mirror, simply reverse the steps above.

Auto Repair
How do you replace turn signal switch on a 1997 peterbuilt? How do you replace 1998 Oldsmobile silhouette auto trans shift cable?
Car Care
Audi Performance Upgrades For The Conservative A4 Do High Temperatures in the Summer Harm Your Gas Mileage?  What cars can you drive with fully comprehensive car insurance?
Engine
What is the function of fuel valve? Where do you get a exhaust pipe for 1990 sunbird parts stores only list non turbo?
Electric Car
In vehicles equipped with ABS the foot must remain firmly on to activate ABS? Do they make heated steering wheels? How do you turn off the passenger side airbag on a 2002 dodge ran 1500 cargo van?
Autopilot
Where do you find Harley Davidson frame specs? What is a cariacture?
Car Photos
How many lugs does a Toyota Camry have? What domestic SUVs can be flat towed? What are the torque specifications for a Chrysler Town and Country van sway bar links?