1. Locate the ignition switch. It is usually located on the right side of the handlebars, near the speedometer.
2. Remove the two screws that hold the ignition switch in place.
3. Disconnect the electrical connectors from the back of the ignition switch.
4. Remove the ignition switch from the motorcycle.
Here are some additional tips for removing the ignition switch in a Honda Nighthawk motorcycle:
- Be careful not to drop the screws that hold the ignition switch in place.
- Take care not to damage the electrical connectors when you disconnect them.
- If you are having difficulty removing the ignition switch, you may need to use a penetrating oil to loosen the screws.
