1) Park your motorcycle on a level surface. Turn off the engine and allow it to cool down.
2) Locate the headlight assembly. The headlight assembly is located on the front of the motorcycle, behind the windscreen. It is held in place by four screws.
3) Remove the four screws that hold the headlight assembly in place. Use a Phillips head screwdriver to remove the screws.
4) Gently pull the headlight assembly out of the motorcycle. Be careful not to drop the headlight assembly.
5) Disconnect the electrical connector from the headlight assembly. The electrical connector is located on the back of the headlight assembly. Press the release button on the connector and pull it apart.
6) Remove the old headlight bulb from the headlight assembly. The headlight bulb is held in place by a metal clip. Use a flat head screwdriver to pry the clip open and remove the bulb.
7) Install the new headlight bulb into the headlight assembly. Make sure that the new bulb is the same wattage as the old bulb. Push the bulb into place and secure it with the metal clip.
8) Reconnect the electrical connector to the headlight assembly. Press the release button on the connector and push it together.
9) Gently push the headlight assembly back into the motorcycle. Be careful not to drop the headlight assembly.
10) Secure the headlight assembly with the four screws. Use a Phillips head screwdriver to tighten the screws.
11) Test the headlight to make sure it works. Turn on the motorcycle and check to see if the headlight turns on.
